HiCAM Fluo High Speed Intensified Camera

HiCAM Fluo High Speed Intensified Camera

Sensor technology

Intensified CMOS

Resolution

1280 x 1024 / 1.3 MP

Pixel pitch

6.6 µm x 6.6 µm

Sensor mode / Frame rate

Global shutter / 1,000 fps

Readout noise

N/A

Interface

CoaXPress

HiCAM FLUO

is a high-speed camera for fluorescence applications. It records high resolution images at a frame rate of 1,000 fps in the most challenging low-light conditions by using a cooled image intensifier. Packed into a compact aluminum enclosure, it is easy to attach the HiCAM FLUO to any fluorescence microscope.

Fiber-optically coupled intensifier

HiCAM FLUO is a gated intensified high-speed camera. It has an integrated fiber-optically coupled image intensifier, which offers a unique combination of high speed imaging and increased light sensitivity down to single photon level. Because the HiCAM does not need high-intensity light sources, it is suitable for use in low-light level conditions like fluorescence imaging.

Cooled image intensifier

The fanless design of the camera minimizes vibrations to ensure sharp images. Very low noise levels are achieved by Peltier cooling the image intensifier. Noise levels are reduced by a factor of up to 100 times as compared to uncooled intensified cameras.

1000 fps @ 1280 x 1024 pixels & global shutter

The HiCAM Fluo records full-resolution images at 1000 fps. To increase the frame rate, the camera can use a smaller part of the sensor to reduce the image resolution. By doing so, it can operate at even higher frame rates. The sensor in the HiCAM Fluo has a full resolution of 1280 x 1024 pixels.  The sensor in the HiCAM Fluo uses an electronic global shutter. This ensures that all pixels are read out at the same time to prevent rolling shutter effects. In combination with intensifier gating, exposure time can be reduced to 3 ns.

 

Description

HiCAM FLUO is a high-speed camera for fluorescence applications. It records high resolution images at a frame rate of 1,000 fps in the most challenging low-light conditions by using a cooled image intensifier. Packed into a compact aluminum enclosure, it is easy to attach the HiCAM FLUO to any fluorescence microscope.

Fiber-optically coupled intensifier

HiCAM FLUO is a gated intensified high-speed camera. It has an integrated fiber-optically coupled image intensifier, which offers a unique combination of high speed imaging and increased light sensitivity down to single photon level. Because the HiCAM does not need high-intensity light sources, it is suitable for use in low-light level conditions like fluorescence imaging.

Cooled image intensifier

The fanless design of the camera minimizes vibrations to ensure sharp images. Very low noise levels are achieved by Peltier cooling the image intensifier. Noise levels are reduced by a factor of up to 100 times as compared to uncooled intensified cameras.

1000 fps @ 1280 x 1024 pixels & global shutter

The HiCAM Fluo records full-resolution images at 1000 fps. To increase the frame rate, the camera can use a smaller part of the sensor to reduce the image resolution. By doing so, it can operate at even higher frame rates. The sensor in the HiCAM Fluo has a full resolution of 1280 x 1024 pixels.  The sensor in the HiCAM Fluo uses an electronic global shutter. This ensures that all pixels are read out at the same time to prevent rolling shutter effects. In combination with intensifier gating, exposure time can be reduced to 3 ns.