CamRecord Sprinter-HD High-speed Camera

CamRecord Sprinter-HD High-speed Camera

Characterize Time

Takes less than 30 minutes

Compatibility

With Low (LM) & High (HM) lenses

Compatibility

With Low (LM) & High (HM) lenses

Performances

Fluorescent-based imaging systems

Performances

Fluorescent-based imaging systems

Characterize Time

Takes less than 30 minutes

The Sprinter-HD high-speed camera of the CamRecord-Sprinter series is equipped with a large-format, highly light-sensitive image sensor that records the fastest movements. The Sprinter-HD high-speed camera can capture at a rate of 3,500 images per second in full format and 12,000 images at a resolution of 1,280 x 240 pixels, the camera is suitable for making very fast object movements visible, right through to simple ballistics. This camera high-speed camera therefore solves demanding measurement tasks in fault analysis and quality assurance for particularly fast-moving objects. The Sprinter-HD high-speed camera is identical to the formally available CR-S3500 model.

Standard-lens-attachments

The Sprinter-HD high-speed camera camera is ideally suited for industrial applications. What makes these cameras user-friendly is a number of standard interfaces but particularly the availabilitly of standard lens attachments.

  • C-Mount
    For microscopy applications or for optimal adjustment of the object size to the sensor size. C-Mount lenses are low priced and due to their wide aperture particularly suitable for applications with high image refresh rates (frames per second).
  • F-Mount (Nikon)
    Allows using widespread Nikon-F lenses with mechanically adjustable aperture ring. Many fixed Focus models are available but also various zoom models.
  • FMG-Mount
    For standard applications with Nikon G-mount lenses. The aperture is adjusted using the ring located on the mount.
  • M42-Mount
    Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.

Ring memory

The Sprinter-HD high-speed camera is equipped with an 16 GB ring memory. After starting recording, the camera stores the image sequence continuously. After triggering, recording continues for a set time. This allows some response time for the exernal trigger detection sytsem.

Using the 16 GB memory, it can store the recording over a period of 4 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process.

Interfaces for the Sprinter-HD high-speed camera

There are several connections on the aluminium camera housing:

  • Mechanical interface
    Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)
  • Fast GigE interface
    High download speeds from the image memory to the memory of the connected PC
  • External trigger and synchronization interface
    Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
  • SSD Slot
    Plugin for a SSD hard disk

Description

The Sprinter-HD high-speed camera of the CamRecord-Sprinter series is equipped with a large-format, highly light-sensitive image sensor that records the fastest movements. The Sprinter-HD high-speed camera can capture at a rate of 3,500 images per second in full format and 12,000 images at a resolution of 1,280 x 240 pixels, the camera is suitable for making very fast object movements visible, right through to simple ballistics. This camera high-speed camera therefore solves demanding measurement tasks in fault analysis and quality assurance for particularly fast-moving objects. The Sprinter-HD high-speed camera is identical to the formally available CR-S3500 model.

Standard-lens-attachments

The Sprinter-HD high-speed camera camera is ideally suited for industrial applications. What makes these cameras user-friendly is a number of standard interfaces but particularly the availabilitly of standard lens attachments.

  • C-Mount
    For microscopy applications or for optimal adjustment of the object size to the sensor size. C-Mount lenses are low priced and due to their wide aperture particularly suitable for applications with high image refresh rates (frames per second).
  • F-Mount (Nikon)
    Allows using widespread Nikon-F lenses with mechanically adjustable aperture ring. Many fixed Focus models are available but also various zoom models.
  • FMG-Mount
    For standard applications with Nikon G-mount lenses. The aperture is adjusted using the ring located on the mount.
  • M42-Mount
    Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.

Ring memory

The Sprinter-HD high-speed camera is equipped with an 16 GB ring memory. After starting recording, the camera stores the image sequence continuously. After triggering, recording continues for a set time. This allows some response time for the exernal trigger detection sytsem.

Using the 16 GB memory, it can store the recording over a period of 4 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process.

Interfaces for the Sprinter-HD high-speed camera

There are several connections on the aluminium camera housing:

  • Mechanical interface
    Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)
  • Fast GigE interface
    High download speeds from the image memory to the memory of the connected PC
  • External trigger and synchronization interface
    Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
  • SSD Slot
    Plugin for a SSD hard disk