Cyclone High-Speed CoaXPress 2.0 cameras

Description

CamPerform-Cyclone series cameras are high-speed CMOS cameras for machine vision applications.  The cameras use the fast CoaXPress 2.0 interface to transmit data at up to 12.5 Gb per second and per channel. Up to 4 channels can be combined to reach a bandwidth of 50 Gb per second. High Performance image sensors are integrated without compromising speed due to limited transfer rate.
Real time image transfer at high-speed and high spatial resolution becomes possible with CamPerform-Cyclone series cameras.

• CXP-12 interface for 4x 12.5 Gb/s
• small housing

Cyclone-1HS-3500

Cyclone-1HS-3500 is a machine vision camera with very high frame rate of 3,500 frames/sec at full resolution. Additional increase of frame rate is possible by reducing image height. The image sensor LUX13HS is operating in global shutter mode. It is available in monochrome and color version. High dynamic range and low noise are resulting from large pixel surface. Similar to all models of CamPerform-Cyclone series the CoaXPress interface version 2.0 with 4 channels at 12.5 Gb/s each is used.
The Cyclone-1HS-3500 is well appropriate for applications where small intensity differences at high speed need to be detected.

Application:

• Fast inspection
• 2D metrology

Global Shutter
CXP12, CXP6

Cyclone-2-2000

The high performance LU19HS sensor is integrated in the Cyclone-2-2000 high-speed CMOS camera. The sensor operates in global shutter mode and is available in a monochrome version as well as a color version. Signal processing in the Cyclone-2-2000 is optimized for low noise. At full HD Resolution of 2 MP this CamPerfrom-Cyclone series camera provides more than 2,000 Frames per second. At reduced image height, frame rate can be increased well beyond this.
The flexibility of the Cyclone-2-2000 makes it the ideal camera for various applications but particularly for 2D/3D measurements.

Application :

• Metrology
• 3D scanning
• Inline inspection

Global shutter
CXP-12, 4x HD-BNC

Cyclone-5-700

With 5 MP resolution a frame rate of more the 700 fps is reached with the Cyclone-5-700 high-speed CMOS camera. Even higher Frame rates can be reached at reduced Image height. The high resolution LUX51 sensor is integrated. This high performance chip operates in global shutter mode. It is available in a monochrome version and a color version.
The high resolution makes the Cyclone-5-700 perfectly suited for demanding applications in 2D- and 3D- measurement

Application:

• 2D/3D Metrology

CXP-12, 4x HD-BNC

Cyclone-16-300

Cyclone-16-300 high-speed CMOS camera provides high spatial resolution of 16 MP and allows to capture images at about 300 frames/sec. The machine vision camera is part of Optronis’ CamPerform-Cyclone series and integrates the LUX160 sensor. This sensor is operating in global shutter mode and as a result it provides low noise image data. A monochrome as well as color version is available. Frame rate can be increased by reducing height of image area.
The Cyclone-16-300 can be used for a broad range of applications but due to the low noise sensor, the camera is well suited for measurement applications.

Application:

• Laser Triangulation
• Metrology
• Inline Inspection

Global Shutter
CXP-12, 4x HD-BNC

Cyclone 65-70

With 65 MPixel relution the Cyclone-65-70 still provides high frame rate of more than 70 fps. The camera is part of Optronis CamPerform-Cyclone series for demanding machine vision applications. Frame rate increases with vertical window size reduction.

Application:

• High Speed Machine Vision
• Automated Optical Inspection (AOI)
• Semiconductor Quality Control

GMAX3265, Global Shutter
CXP-12, 4x HD-BNC

CUTTING-EDGE CAMERA TECHNOLOGY FOR YOUR AUTOMATION SOLUTION

Here are our convincing arguments for a compelling image-processing machine vision solution: CoaXPress and CameraLink interface, standard lens mount, industry-standard design, GenICam and EMVA 1288 standard compliance and a configuration tool to meet the needs of the job. With CamPerform, real-time automation – in respect of optics as well – can be realized in a way that you’ll find simple, sure and sound.

EASY TO USE

The CamPerform series gives you the high-tech. As a result it makes your work as simple as possible. Every camera is configured to the GenICam standard. Therefore it has:

• Standardized configuration
• Standard descriptions of camera features

COAXPRESS INTERFACES

Optronis established the high-performance interface for industrial image processing with the first 4MP CoaXpress high-speed camera back in 2011. We identify technology trends and focus on useful technologies which means you benefit from pragmatic and functional solutions:

• 4x CoaXpress interfaces
• Image data transmission at top speed
• Quality seal of the Japan Industrial Imaging Association (JIIA)

CMOS SENSOR TECHNOLOGY

As early as CMOS sensor technology was launched, Optronis decided to focus on this technology. Therefore the CamPerform line offers you the latest sensor technology that has been designed to make the perfect marriage of camera-specific hardware and software and that means enhanced safety right across the board!

• High data volumes
• Precise and accurate image reproduction
• Proven and sophisticated PowerDesign